Two-panel sliding doors
The most common configuration for balconies, terraces and bedroom openings.
ALUMINIUM · AJMAN, UAE
Aluminium sliding doors in Ajman.
Dreams Aluminium and Glass Workshop fabricates and installs aluminium sliding doors in Ajman for villas, offices, shops and hotels. Each door is built to the opening size in our Ajman Industrial Area 1 workshop, then fitted with tracks and rollers sized to the panel weight.
01 / THE SERVICE
Sliding doors by Dreams, made in Ajman.
Aluminium sliding doors suit openings where a hinged door would take up too much room, such as balconies, terraces, majlis areas and shopfronts. Panels run along a top or bottom track instead of swinging outward, so the space in front of the door stays clear for furniture, seating or foot traffic.
We fabricate every sliding door to the exact opening in our own workshop, choosing track and roller sizes for the panel weight and span. Two-panel, multi-track and lift-and-slide configurations are all made in-house, then installed and adjusted on site so panels glide smoothly without dragging, sticking or catching on the floor track.
Multi-track sliding doors
Two or more tracks so several panels stack and slide independently for wide openings.
Lift-and-slide doors
Heavier panels that lift slightly off the track before sliding, for large glass openings.
Pocket sliding doors
Panels that slide fully into a side wall pocket for a clean, open finish.
Sliding shopfront doors
Commercial-grade sliding doors sized for daily footfall in shops and showrooms.
02 / APPLICATIONS
Where we install sliding doors.
Villas
Balcony, terrace and garden-facing openings that need to stay usable and clear.
Majlis & living areas
Wide openings that connect indoor seating to a courtyard or garden.
Offices
Meeting rooms and break-out areas where floor space is limited.
Retail
Shopfronts and display openings that need to open fully during trading hours.
Hotels
Guest room balcony doors that must run smoothly and seal well.
Restaurants & cafes
Openings between indoor seating and outdoor terraces.
03 / MATERIALS & FINISHES
What goes into it.
We confirm every material, colour and fitting with you before fabrication starts.
- Track & roller systems
- Aluminium tracks and ball-bearing rollers sized to the panel weight for a smooth, quiet slide.
- Aluminium profiles
- Standard or thermal-break profiles depending on whether the opening is air-conditioned.
- Glass
- Clear, tinted or tempered glass, glazed to suit privacy and safety requirements.
- Locks & handles
- Multi-point locking hardware and handles matched to the door's size and use.
- Weatherseals
- EPDM gaskets and brush seals along the track to keep out dust, wind and rain.
04 / GALLERY
Our work.
Images marked “illustrative” show the type of system; all others are Dreams projects. See completed projects ↗
05 / OUR PROCESS
Designed. Fabricated. Installed.
One team from first drawing to final handover.
- 01
Enquiry & drawings
Send your drawings, BOQ, photos or rough sizes on WhatsApp or through the quote form.
- 02
Site survey & measurement
At survey we measure the exact opening width and floor level, check whether the door needs a two-panel or multi-track layout, and confirm the threshold detail before fabrication.
- 03
Quotation & approval
You receive a clear, itemised quotation. Profiles, glass, colours and hardware are confirmed before we start.
- 04
Fabrication in Ajman
Cutting, machining, assembly and quality checks in our workshop in Ajman Industrial Area 1.
- 05
Installation & handover
Our own team installs, seals, cleans and hands over — with after-service when you need it.
06 / WHY CHOOSE US
Why choose Dreams for sliding doors.
Since 2006 · 150+ projects · 7 emirates
Fabricated to the exact opening
No off-the-shelf sizes — every panel and track is made for your opening in our Ajman workshop.
Track sized to the load
We size rollers and tracks to the panel weight, so large glass panels still slide smoothly.
Matched to the rest of the building
Sliding doors are finished to match your other aluminium windows and doors on the same project.
Installed and adjusted on site
Our own installation team fits and fine-tunes every door so it runs true from day one.
FREQUENTLY ASKED QUESTIONS
Sliding doors in Ajman: FAQs.
Do you fabricate aluminium sliding doors in Ajman?
Yes. We design, fabricate and install aluminium sliding doors in our Ajman Industrial Area 1 workshop for villas, offices, shops and hotels across the UAE.
How wide can a sliding door opening be?
Very wide openings are usually split across two or more tracks, with several panels stacking to one or both sides. Send us the opening width and we will suggest a layout.
How much do aluminium sliding doors cost in Ajman?
Cost depends on size, number of panels, glass type and hardware. Send your dimensions or photos and we will prepare a free quotation.
Why do sliding doors sometimes feel heavy to open?
This usually means the rollers or track are undersized for the glass weight, or the track is dirty. We size hardware to the panel weight to avoid this.
Can sliding doors be fitted with mosquito screens?
Yes, a sliding screen panel can run on an extra track alongside the glass door. Tell us at survey stage if you need one.
RELATED SERVICES
More aluminium services in Ajman.
Aluminium doors & windowsFolding doorsAutomatic doorsAluminium windowsSkylightsAll aluminium services ↗
01
Aluminium doors & windows
↗Sliding, folding and automatic aluminium doors and windows, fabricated and installed by Dreams.
02
Folding doors
↗Multi-panel aluminium folding doors that open wide for indoor-outdoor spaces.
03
Aluminium windows
↗Fixed, sliding and casement aluminium windows fabricated to size by Dreams.
GET YOUR FREE QUOTATION
Tell us about your project.
Upload your drawings, BOQ or site photos for a faster quotation. Our Ajman team reviews every enquiry and replies with questions or a priced quotation.
- Free, no-obligation quotation
- Priced direct from our own workshop in Ajman
- Villas, commercial projects and contractor packages
- Ajman, Sharjah, Dubai and across the UAE