Automatic sliding doors
Single or double sliding leaves for shopfronts, showrooms and lobbies.
ALUMINIUM · AJMAN, UAE
Automatic doors in Ajman.
Dreams Aluminium and Glass Workshop fabricates and installs automatic glass doors in Ajman for shopfronts, showrooms, clinics and offices. Aluminium framing is built in our workshop to fit the opening, and the door is set up so it opens and closes reliably for regular foot traffic.
01 / THE SERVICE
Automatic doors by Dreams, made in Ajman.
Automatic doors are common at building entrances that see steady foot traffic, hands-free need, or accessibility requirements, such as shopfronts, showrooms, clinics and hotel lobbies. The aluminium frame and glass panel are fabricated to the opening, then fitted with a sliding or swing operator so the door responds to sensors or a push button.
We build the aluminium framing and glass leaf in our Ajman workshop to match the shopfront or entrance it sits in, then coordinate the sliding or swing mechanism during installation. Sensor placement and door speed are checked on site so the entrance opens smoothly without catching pedestrians, trolleys or wheelchairs, and adjusted again after handover if foot traffic changes.
Automatic swing doors
Swing-operated entrances for clinics, offices and accessible entrances.
Telescopic sliding doors
Wider clear openings achieved by panels sliding behind one another.
Curved sliding doors
Curved-track sliding doors for entrances with a rounded facade.
02 / APPLICATIONS
Where we install automatic doors.
Shopfronts & showrooms
High-traffic entrances that need to open and close reliably all day.
Clinics & hospitals
Hands-free entrances for patients, trolleys and wheelchair access.
Hotels
Lobby entrances that welcome guests without a manual push or pull.
Offices
Reception entrances that present a clean, modern first impression.
Supermarkets & hypermarkets
Wide entrances built to handle trolleys and steady customer flow.
Banks
Controlled entrances where door speed and sensor range can be set carefully.
03 / MATERIALS & FINISHES
What goes into it.
We confirm every material, colour and fitting with you before fabrication starts.
- Aluminium framing
- Slim frame profiles fabricated to the entrance opening for maximum glass area.
- Tempered glass
- Heat-treated safety glass, around four to five times stronger than annealed glass, used for the door leaf.
- Sensors & operators
- Motion or presence sensors paired with a sliding or swing operator sized to the door's weight.
- Floor & header track
- Aluminium track set into the floor or overhead, aligned during installation for smooth travel.
04 / GALLERY
Our work.
Images marked “illustrative” show the type of system; all others are Dreams projects. See completed projects ↗
05 / OUR PROCESS
Designed. Fabricated. Installed.
One team from first drawing to final handover.
- 01
Enquiry & drawings
Send your drawings, BOQ, photos or rough sizes on WhatsApp or through the quote form.
- 02
Site survey & measurement
At survey we check the opening width, expected foot traffic and power supply location, and confirm whether a sliding or swing operator suits the entrance before ordering.
- 03
Quotation & approval
You receive a clear, itemised quotation. Profiles, glass, colours and hardware are confirmed before we start.
- 04
Fabrication in Ajman
Cutting, machining, assembly and quality checks in our workshop in Ajman Industrial Area 1.
- 05
Installation & handover
Our own team installs, seals, cleans and hands over — with after-service when you need it.
06 / WHY CHOOSE US
Why choose Dreams for automatic doors.
Since 2006 · 150+ projects · 7 emirates
Framing built to fit
Aluminium framing is fabricated to your exact opening, not adapted from a standard kit.
Operator matched to traffic
We recommend sliding or swing operators based on how busy the entrance is.
Sensor set-up on site
Sensor range and door timing are checked and adjusted after installation, not left on factory defaults.
One team for framing and operation
The same project is responsible for the aluminium, the glass and the automatic operator, so there is one point of contact.
FREQUENTLY ASKED QUESTIONS
Automatic doors in Ajman: FAQs.
Do you install automatic doors in Ajman?
Yes. Dreams fabricates the aluminium framing and installs automatic sliding and swing doors in Ajman for shopfronts, clinics, offices and hotels across the UAE.
Sliding or swing — which is better for a shopfront?
Sliding doors suit narrow footpaths since they do not swing outward; swing doors suit wider entrances with clear space in front. We can recommend based on your layout.
How much do automatic doors cost in Ajman?
Cost depends on opening size, glass type and the sensor and operator specification. Send photos or drawings and we will prepare a free quotation.
What happens to an automatic door during a power cut?
Most operators allow the door to be pushed open by hand in a power failure. We confirm this behaviour with you during installation.
Can an existing manual shopfront be converted to automatic?
Often yes, if the existing frame can take an operator and track. We assess this at site survey before quoting.
RELATED SERVICES
More aluminium services in Ajman.
Aluminium doors & windowsSliding doorsFolding doorsAluminium windowsSkylightsAll aluminium services ↗
01
Aluminium doors & windows
↗Sliding, folding and automatic aluminium doors and windows, fabricated and installed by Dreams.
02
Folding doors
↗Multi-panel aluminium folding doors that open wide for indoor-outdoor spaces.
03
Aluminium windows
↗Fixed, sliding and casement aluminium windows fabricated to size by Dreams.
GET YOUR FREE QUOTATION
Tell us about your project.
Upload your drawings, BOQ or site photos for a faster quotation. Our Ajman team reviews every enquiry and replies with questions or a priced quotation.
- Free, no-obligation quotation
- Priced direct from our own workshop in Ajman
- Villas, commercial projects and contractor packages
- Ajman, Sharjah, Dubai and across the UAE