Two-point & four-point fittings
Spider fittings bolted through two or four points of each glass panel.
FACADE · AJMAN, UAE
Spider glazing in Ajman.
Dreams designs, fabricates and installs spider glazing in Ajman, using stainless steel spider fittings to hold glass panels without a visible frame. The team serves villas, offices and commercial buildings across Ajman and the wider UAE.
01 / THE SERVICE
Spider glazing by Dreams, made in Ajman.
Spider glazing, also called point-supported glazing, holds large glass panels with stainless steel fittings bolted through the corners of each pane instead of a continuous aluminium frame. It is used where a building wants an open, almost frameless glass line, typically at entrances, atriums or feature walls. Dreams designs, fabricates and installs spider glazing from our workshop in Ajman.
Spider fittings connect back to a steel or aluminium support structure behind the glass, so the frame that carries the load is hidden from view. Panel size, fitting spacing and the support structure all have to be engineered for the glass and wind load before fabrication starts. We take on spider glazing for entrances, atriums and feature facades for villas, offices and commercial buildings across Ajman and the UAE.
Entrance glazing
Frameless glass entrances supported on spider fittings and a rear support structure.
Atrium & feature walls
Tall glass sections for atriums and feature walls, point-supported for an open look.
Canopy glazing
Spider-supported glass canopies over entrances and walkways.
Cable & truss-supported glazing
Glass supported on cable or truss systems for wider, column-free spans.
02 / APPLICATIONS
Where we install spider glazing.
Building entrances
Frameless glass entrance walls for offices, hotels and showrooms.
Atriums
Tall, open glass sections that bring daylight into lobbies and atriums.
Showrooms
Feature glass walls that keep the shopfront display uninterrupted.
Hotels
Glazed lobbies and public areas with a clean, frameless finish.
Canopy entrances
Point-supported glass canopies over doors and walkways.
Villas
Feature glass walls or entrance glazing for larger villas.
03 / MATERIALS & FINISHES
What goes into it.
We confirm every material, colour and fitting with you before fabrication starts.
- Spider fittings
- Stainless steel 316 spider fittings, preferred near the coast for corrosion resistance.
- Support structure
- Steel or aluminium mullions and trusses behind the glass line, engineered to the span.
- Glass
- Toughened or laminated glass, sized and drilled to the fitting layout.
- Sealants
- Structural silicone at panel joints to keep the facade weathertight.
04 / GALLERY
Our work.
Images marked “illustrative” show the type of system; all others are Dreams projects. See completed projects ↗
05 / OUR PROCESS
Designed. Fabricated. Installed.
One team from first drawing to final handover.
- 01
Enquiry & drawings
Send your drawings, BOQ, photos or rough sizes on WhatsApp or through the quote form.
- 02
Site survey & measurement
At the site survey we check the wind load, glass span and available support structure, since these set the spider fitting layout and glass thickness.
- 03
Quotation & approval
You receive a clear, itemised quotation. Profiles, glass, colours and hardware are confirmed before we start.
- 04
Fabrication in Ajman
Cutting, machining, assembly and quality checks in our workshop in Ajman Industrial Area 1.
- 05
Installation & handover
Our own team installs, seals, cleans and hands over — with after-service when you need it.
06 / WHY CHOOSE US
Why choose Dreams for spider glazing.
Since 2006 · 150+ projects · 7 emirates
Point-supported detailing
Spider fitting layouts are engineered to the glass panel size and wind load.
Coastal-grade fittings
Stainless steel 316 fittings used where corrosion resistance matters.
In-house fabrication
Support structure and glass panels prepared in our Ajman workshop before installation.
UAE-wide delivery
Spider glazing installed for entrances and feature facades across Ajman, Sharjah, Dubai and the other emirates.
FREQUENTLY ASKED QUESTIONS
Spider glazing in Ajman: FAQs.
Do you install spider glazing in Ajman?
Yes. Dreams designs, fabricates and installs spider glazing in Ajman for entrances, atriums and feature facades, and serves the rest of the UAE from the same workshop.
What is spider glazing?
Spider glazing, or point-supported glazing, holds glass panels with stainless steel fittings bolted through the corners, instead of a continuous frame, for a more open look.
How much does spider glazing cost?
Cost depends on panel size, fitting layout, support structure and site access. Share drawings or photos and approximate dimensions for a free quotation.
Is spider glazing as strong as framed glazing?
Yes, when the fittings, glass thickness and support structure are engineered for the span and wind load. The design has to match the site conditions.
Where is spider glazing normally used?
Most often at entrances, atriums, feature walls and canopies, where an open, frameless look matters more than it does on a typical window wall.
RELATED SERVICES
More facade services in Ajman.
01
Curtain wall
↗Aluminium curtain wall systems for offices, showrooms and commercial buildings in Ajman.
02
Structural glazing
↗Frameless structural glazing for clean, continuous glass facades on commercial buildings.
03
Building facades
↗Facade design, fabrication and installation combining glazing, cladding and aluminium.
GET YOUR FREE QUOTATION
Tell us about your project.
Upload your drawings, BOQ or site photos for a faster quotation. Our Ajman team reviews every enquiry and replies with questions or a priced quotation.
- Free, no-obligation quotation
- Priced direct from our own workshop in Ajman
- Villas, commercial projects and contractor packages
- Ajman, Sharjah, Dubai and across the UAE